HomeCustomer Bike ModificationsFinished Bike ModificationsAbout UsAPC MotorcyclesParts and AccessoriesAMSOIL / Harley Davidson Lubs comparisonProduct Detail PageInter Natrix Alarm SystemMap/DirectionsShippingRefer a FriendContact UsHi-Temp ProductsUpholsteryCustom Painting

Finished Bike Modifications

MODIFICATIONS FOR CUSTOMERS RIDES

218.JPG
FINISHED BIKE

218.JPG

Removed all graphics from tank, front & rear fenders.
Built license plate recess in rear fender and cat eye tail lite pictured below.
Welded tank valve hole located in the bottom mid section of the gas tank shut.
Welded a new valve insert in rear section of the tank.
Refinished in ebony black and painted real fire flames and clear coated all parts.
 Installed new tires front & rear and balanced.
Installed new exhaust, new dogs in clutch assembly, new primary drive belt, new handle bars and new front axle.

197.JPG

207.JPG

ArtsbikePICS/102_3107.JPG
PICTURES OF CHOPPER BEFORE & DURING CONVERSION WORK.

ArtsbikePICS/102_3107.JPG

ArtsbikePICS/102_3107.JPG

ArtsbikePICS/102_3107.JPG

ArtsbikePICS/102_3116.JPG

ArtsbikePICS/102_3116.JPG

ArtsbikePICS/102_3116.JPG

ArtsbikePICS/213.JPG

ArtsbikePICS/213.JPG

Customers Bike before rebuilding & painting.
RTCustomWebsiteBIKEPics302.jpg

(AFTER) Candy Apple Red w/ Gold Pearl Ghost Flames
BIKEPicsMarch312009020.jpg

Stripped every component off the bike to the bare frame. Had the frame sand blasted for repainting.
Re-worked back fender from damage, Tig welded some holes shut. Cut off old fender struts and built
new ones with knife blades I fabricated from flat steel. Built spring plates under seat, built wiring module box
under tank with ignition switch and cover plate. Tig welded new gas tank mounts for new custom tank.
Used a tank sealer kit to seal new tank inside. Installed new triple trees and tig welded in new fork stop mounts.
Fabricated a new tail light mounting plate and tig welded it to the lower left rear frame tube. 
Re-built the bike after painting the frame, tank and fenders. Installed a new tail light, rewired the bike hiding wires
and connectors in the headlamp housing to give it a cleaner look. Installed red LED lights that shine down on the engine.
Real cool effect with the red candy apple paint. Changed the chrome oil filter and used Amsoil 20W50 in the engine. 

GOLD PEARL GHOST FLAMES
BIKEPicsMarch312009025.jpg

RTCustomWebsiteBIKEPics382.jpg

RTCustomWebsiteBIKEPics382.jpg

Gold pearl flames on silver base /Candy apple red
BIKEPicsMarch312009024.jpg

DonMcSorleyBIKE/102_3127.JPG

DonMcSorleyBIKE/102_3127.JPG

DonMcSorleyBIKE/102_3127.JPG

Built this module and ignition switch housing from flat sheet steel which I mounted under the tank on the frame rail.
The seat springs: Built from aircraft valve springs and mounted on top of the battery box to add comfort for the rider on
this hardtail frame.
Reshaped the license plate mount, made the flat steel mount I TIG welded to the lower rear frame tube. Powdercoated
red to match frame and installed new cateye tail light.

DonMcSorleyBIKE/102_3127.JPG

Gold pearl flames on silver base /Candy apple red
BIKEPicsMarch312009023.jpg

Gold pearl flames on silver base /Candy apple red
BIKEPicsMarch312009026.jpg

This is a 1999 Harley Davidison Nightrain. The bike had a previous lowering kit installed on the rearend. I Installed new 5 degree triple trees with new 2 inch over stock front fork tubes. Cleaned the lower shock legs from slug buildup over the years. Replaced the fork oil with new Amsoil Shock Threapy Treatment. Installed new Avon tires front and rear including a new rear valve stem. Rear tire had a bead leak. Fixed the rim surface to stop the leak. Installed new chrome oil filter and changed oil to Amsoil 20w50 synethetic motorcycle oil. Adjusted carburetor, adjusted clutch. The bike was in this years World of Wheels Show.  With the new frontend the bike has a longer pro-street bike look that still handles great with no frontend flop.

BIKEPicsMarch312009013.jpg

BIKEPicsMarch312009013.jpg

102_3062.JPG

102_3062.JPG

102_3062.JPG

102_3062.JPG